I’ve been meaning to post about this for ages, but for some reason I’ve always had something better to do, like washing my hair. As I detailed in my previous post about XBMC the Thecus N3200 NAS and NFS, I couldn’t get it working, as XBMC couldn’t mount the NFS shares and I couldn’t adjust the mounts via the Thecus N3200 OS. I gave up in the end and switched my XBMC distro from OpenELEC to Raspbmc mainly so I could get access to the underlying Debian OS and thus edit the
Installing Raspbmc is a breeze, just download the install script, stuff your SD card into your computer, run the script and then go and enjoy a beer while it does its stuff. Then all that was left to do, was ssh into the Raspberry Pi and edit it’s copy of
/etc/fstab and create some local folders to mount the shares to. As I’d previously done all of that on my laptop, it was just a case of copying the relevent bits from one
/etc/fstab to the other. A reboot later and XBMC was happily adding all the media from what it thought was a local folder.
Just in case you find yourself in a similar position, here’s the entries in the
/etc/fstab on my laptop:
||# Thecus N3200 mount points, assuming your NAS has a fixed IP of 192.168.0.100
||192.168.0.100:/raid/Bob /home/boba/nas/bob nfs rw
||192.168.0.100:/raid/Photos /home/boba/nas/photos nfs rw
||192.168.0.100:/raid/Music /home/boba/nas/music nfs rw
||192.168.0.100:/raid/Video /home/boba/nas/video nfs rw
My second Raspberry Pi turned up yesterday, which made me smile. Now I just need to decide on a project to use it on. I have a few ideas, but as with anything, finding the time to execute might be problematic. The other small issue, is that I’m pants at electronics, it’s one subject that I never really paid any attention to when at Uni, so my skills are a bit lacking. Hopefully something like the Gertboard or the PI Face IO board will help in that respect, but I should probably get a breadboard from somewhere and start tinkering.
I have two main projects in mind, one is to automate my home brewery, the other, to turn the Raspberry Pi in to a flight computer for use in my high power rockets. There are a few other things that I’ve thought of, but those are the two main ones. Even though I’ve been told that the Raspberry Pi isn’t ideal as a flight computer, I’d still like to fly it, although I might wait for the camera board before looking into doing that.
Either way, I now have to Pi’s and I need to start making use of them.
After getting OpenELEC installed on an SD card and running on my Raspberry Pi, the next step was to get XBMC serving up all the media that is stored on our Thecus N3200 NAS.
It looked like it should be pretty straight forward, as I already have various NFS mounts setup on the NAS for access via my Kubuntu laptop. However, I just couldn’t get XBMC to browse into any of the mounted folders; it could see them, just not access them.
There isn’t much information out there about my NAS, mainly as it was superseded pretty quickly by the N3200PRO. Which meant that there wasn’t much information with which to try and diagnose the issue. After a bit of googling, I did manage to track down a post that implied that my NFS mounts would need to invoke insecure mode, which was backed up by the XBMC wiki. Shame the N3200 doesn’t expose any real NFS settings, so you can’t configure the mounts from the frontend; at least not with the last official firmware.
I did look at adding the insecure flag the NFS mounts directly, via the
/etc/exports file; shame that you can’t SSH into the NAS by default though. After a bit more trawling, I found a couple of modules that would allow me to reset the root password and run a SSH demon. With the modules loaded, I SSH’d into the NAS and added the insecure flag to each of the NFS mounts; shame the changes were lost when I rebooted. I eventually gave up trying and asked for help on the Thecus forums, I haven’t had a reply yet.
While I wait on a reply, I just added the various mounts to XBMC via SMB. It’s not my first choice, but it appears to work fine, at least there were no obvious streaming issues while I watched Ratatouille last night…
The HDMI cables and SD cards I ordered via Amazon, were waiting for me when I got home on Friday after work. So I spent some of Saturday morning trying to get OpenELEC up and running on my Raspberry Pi, with various levels of success.
Earlier in the week I cloned the OpenELEC github repository and compiled the source, before installing it onto the SD card I normally use in my Nikon P6000. I followed the instructions on this page of the OpenELEC wiki and it appeared to all go to plan. A couple of corrections needed to be made in the Installing OpenELEC to the SD Card section, as the build put certain files in a different place to that specified. Instead of copying the files from:
$ sudo cp build.OpenELEC-RPi.arm-devel/bcm2835-driver-*/boot/arm128_start.elf /media/System/start.elf
$ sudo cp build.OpenELEC-RPi.arm-devel/bcm2835-driver-*/boot/bootcode.bin /media/System/
$ sudo cp build.OpenELEC-RPi.arm-devel/bcm2835-driver-*/boot/loader.bin /media/System/
They were in the bcm2835-bootloader-* folder, not the bcm2835-driver-* folder, so I copied them with:
$ sudo cp build.OpenELEC-RPi.arm-devel/bcm2835-bootloader-*/arm128_start.elf /media/System/start.elf
$ sudo cp build.OpenELEC-RPi.arm-devel/bcm2835-bootloader-*/bootcode.bin /media/System/
$ sudo cp build.OpenELEC-RPi.arm-devel/bcm2835-bootloader-*/loader.bin /media/System/
After a bit of faffing with my TV and AV equipment, I finally managed to get a picture displaying on the TV, but as you can see from the image at the top of this post, all I got was an error message. Rather than break out the laptop to edit the cmdline.txt file and spend a while trying to get the partition name correct, I just downloaded one of the nightly builds and ran the create_sdcard utility. This produced a working SD card and I was able to boot straight into XBMC, all in all a much easier and less time consuming option.
I meant to get up early the day the Raspberry Pi was put on sale, but I totally forgot. By the time I remembered, both the Farnell and RS websites had long melted down. I eventually managed to get on the waiting lists at both companies and finally, after what has seemed like an ages, my first Raspberry Pi arrived on Saturday.
I should have been prepared, I had meant to buy a HDMI cable and a SD card, but it was the Cambridge Beer Festival last week, so beer was more of a priority. I did take it into work with me today though and got it all wired up to ensure it was all working. It was really cool to see the large raspberry appear on the screen.
Now I just need to wait till later in the week when some HDMI cables and SD cards arrive via Amazon. In the meantime, I need to build OpenELEC, as this Pi is going to be running XBMC and serving up all the familys media in the living room. It’ll be another month or so until my second unit comes and this gives me some time to think of things to do with it. I might put it into a rocket, or I may look to use it in automating my homebrewery, we’ll see.
I’m looking forward to playing with it and I think I’ll have to get another couple of SD cards so that the kids can have one each and learn how to prgram, if they want to. Either way, I’m looking forward to my slice of Pi.